Three access points are used within a facility. One access point is on channel 11 and the other two are on channel 1. The two access points using channel 1 are on either side of the access point using channel 11 and sufficiently apart so that they do not interfere with each other when they transmit frames. Assuming no other APs are in the vicinity, is CCI still a possibility in this network and why?
CCI is still a possibility in this network because the client devices connected to one of the channel 1 APs will transmit frames that reach the other channel 1 AP as well as clients connected to the other channel 1 AP. CCI stands for co-channel interference, which is a type of interference that occurs when two or more devices transmit on the same channel within range of each other. CCI reduces performance and capacity because it causes contention and collisions on the wireless medium, which leads to retransmissions and delays. CCI can be mitigated by increasing physical separation between devices using the same channel or by reducing transmit power levels to limit coverage area. In this scenario, three access points are used within a facility. One access point is on channel 11 and the other two are on channel 1. The two access points using channel 1 are on either side of the access point using channel 11 and sufficiently apart so that they do not interfere with each other when they transmit frames. However, this does not prevent CCI from occurring between their client devices that are connected on channel 1. For example, if a client device connected to one of the channel 1 APs sends a frame to another device on the wired network or on another wireless network (such as an Internet server or a VoIP phone), that frame will be heard by both channel 1 APs as well as any other client devices connected to either of them on channel 1. This will cause CCI because these devices will have to wait for the channel to be clear before they can transmit their own frames. The answer that CCI only occurs in the 5 GHz frequency band is incorrect; CCI can occur in any frequency band where devices use the same channel. The answer that channel 11 loops around and causes CCI with channel 1 is also incorrect; channel 11 does not loop around and it operates in a different frequency band than channel 1.Reference:CWNA-109 Study Guide, Chapter 5: Radio Frequency Signal and Antenna Concepts, page 147
Lynelle
2 months agoPaulina
2 months agoViki
2 months agoKatie
1 months agoKarol
1 months agoJerrod
1 months agoKenneth
2 months agoPercy
19 days agoYolande
20 days agoLuz
1 months agoLeonardo
2 months agoDarrin
2 months agoMelvin
2 months agoCecil
1 months agoElke
1 months agoMichal
2 months agoDianne
2 months agoElizabeth
2 months agoAntione
2 months agoMargret
2 months agoRolande
2 months agoRosina
2 months agoRessie
2 months agoWhitley
3 months agoElke
2 months agoLucy
2 months agoMarjory
2 months agoLizette
2 months ago