CWNP CWNA-109 Exam Questions

OFDMA is a new modulation scheme introduced in 802.11ax that allows multiple users to share the same channel by dividing it into smaller subchannels called resource units (RUs). This improves the efficiency and capacity of the WLAN by reducing contention and overhead. However, to use OFDMA, both the AP and the client must support 802.11ax and negotiate the parameters of the subchannel allocation.Therefore, the customer needs to upgrade the clients that require OFDMA to 802.11ax devices12.

The other options are not correct because they do not reflect the reality of OFDMA.Option B is incorrect because OFDMA is a mandatory feature of 802.11ax for both downlink and uplink transmissions, and all 802.11ax APs must support it1. Option C is incorrect because OFDM and OFDMA are different modulation schemes, and OFDM does not allow multiple users to share the same channel.Option D is incorrect because 802.11ac devices cannot support OFDMA through driver upgrades, as they lack the hardware and firmware capabilities to do so2.

The string of characters and digits that is entered into an AP and a client STA for WPA2 security and is 8 characters long is called apassphrase. A passphrase is a human-readable text that is used to generate a Pre-Shared Key (PSK) for WPA2-Personal security. A passphrase can be between 8 and 63 characters long and can include any ASCII character. The PSK is a 256-bit key that is derived from the passphrase using a hashing algorithm called PBKDF2. The PSK is used to encrypt and decrypt the data frames between the AP and the client STA. A MSK is a Master Session Key that is generated by an authentication server for WPA2-Enterprise security. A WEP key is a 40-bit or 104-bit key that is used for Wired Equivalent Privacy (WEP) security, which is deprecated and insecure. A PSK is not a string of characters and digits, but a binary key.Reference:[CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 303; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 293.

USB 3 devices in the user's work area are the most likely cause of this interference when using a spectrum analyzer to look for non-Wi-Fi interference sources. A spectrum analyzer is a tool that measures and visualizes the radio frequency activity and interference in the wireless environment. A spectrum analyzer can show the spectrum usage and energy levels on each frequency band or channel and help identify and locate the sources of interference. Interference is any unwanted signal that disrupts or degrades the intended signal on a wireless channel. Interference can be caused by various sources, such as other Wi-Fi devices, non-Wi-Fi devices, or natural phenomena. Interference can affect WLAN performance and quality by causing signal loss, noise, distortion, or errors. USB 3 devices are non-Wi-Fi devices that use USB 3.0 technology to transfer data at high speeds between computers and peripherals, such as hard drives, flash drives, cameras, or printers. USB 3 devices can generate electromagnetic radiation that interferes with Wi-Fi signals in the 2.4 GHz band, especially when they are close to Wi-Fi devices or antennas. USB 3 devices can cause significant interference across the entire 2.4 GHz band (not on a few select frequencies) within the desktop area of a user's workspace, but the interference disappears quickly after just 2 meters. This is because USB 3 devices emit broadband interference that affects all channels in the 2.4 GHz band with a high intensity near the source but a low intensity at a distance due to attenuation. The other options are not likely to cause this interference pattern when using a spectrum analyzer to look for non-Wi-Fi interference sources. Bluetooth devices in the user's work area are non-Wi-Fi devices that use Bluetooth technology to communicate wirelessly between computers and peripherals, such as keyboards, mice, headphones, or speakers. Bluetooth devices can cause interference with Wi-Fi signals in the 2.4 GHz band, but they use frequency hopping spread spectrum (FHSS) technique that changes frequencies rapidly and randomly within a range of 79 channels. Therefore, Bluetooth devices do not cause significant interference across the entire 2.4 GHz band (not on a few select frequencies), but rather intermittent interference on some channels at different times. Excess RF energy from a nearby AP is not a non-Wi-Fi interference source but rather a Wi-Fi interference source that occurs when an AP transmits more power than necessary for its coverage area. Excess RF energy from a nearby AP can cause co-channel interference (CCI) with other APs or client devices that use the same channel within range of each other. CCI reduces performance and capacity because it causes contention and collisions on the wireless medium,

S1G is one of the 802.11 PHYs that is more likely to be used in an industrial deployment but not likely to be used in standard office deployments. This is because S1G stands for Sub-1 GHz, which means it operates in the frequency bands below 1 GHz, such as 900 MHz and 868 MHz. These bands offer better penetration and range than the higher frequency bands used by other 802.11 PHYs, such as 2.4 GHz and 5 GHz. This makes S1G suitable for industrial applications that require robust and reliable wireless communication in harsh environments, such as factories, warehouses, mines, and smart grids. S1G also supports low-power and low-data-rate devices, such as sensors, actuators, and meters, which are common in industrial Internet of Things (IoT) scenarios.VHT, OFDM, and HT are other 802.11 PHYs that are more commonly used in standard office deployments, as they offer higher data rates and capacity than S1G, but have lower range and penetration.Reference:CWNA-109 Study Guide, Chapter 3: Radio Frequency Technologies, page 751

CCI is still a possibility in this network because the client devices connected to one of the channel 1 APs will transmit frames that reach the other channel 1 AP as well as clients connected to the other channel 1 AP. CCI stands for co-channel interference, which is a type of interference that occurs when two or more devices transmit on the same channel within range of each other. CCI reduces performance and capacity because it causes contention and collisions on the wireless medium, which leads to retransmissions and delays. CCI can be mitigated by increasing physical separation between devices using the same channel or by reducing transmit power levels to limit coverage area. In this scenario, three access points are used within a facility. One access point is on channel 11 and the other two are on channel 1. The two access points using channel 1 are on either side of the access point using channel 11 and sufficiently apart so that they do not interfere with each other when they transmit frames. However, this does not prevent CCI from occurring between their client devices that are connected on channel 1. For example, if a client device connected to one of the channel 1 APs sends a frame to another device on the wired network or on another wireless network (such as an Internet server or a VoIP phone), that frame will be heard by both channel 1 APs as well as any other client devices connected to either of them on channel 1. This will cause CCI because these devices will have to wait for the channel to be clear before they can transmit their own frames. The answer that CCI only occurs in the 5 GHz frequency band is incorrect; CCI can occur in any frequency band where devices use the same channel. The answer that channel 11 loops around and causes CCI with channel 1 is also incorrect; channel 11 does not loop around and it operates in a different frequency band than channel 1.Reference:CWNA-109 Study Guide, Chapter 5: Radio Frequency Signal and Antenna Concepts, page 147